This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.
Enphase Q-Relay for IQ7 & IQ8 Series - Three Phase
Enphase Q-Relay for IQ7 & IQ8 Series - Three Phase
In Enphase installations, the three-phase Q Relay (network system relay controller) acts as a galvanic disconnection device. It is designed for three phase use and has built in contactors. During specified grid abnormalities, the Q Relay disconnects the Enphase Microinverters from the AC grid, and when the voltages return to normal and the grid frequency is in the acceptable range, the Q Relay reconnects the microinverters to the AC grid.
The Q Relay has built in current sensing that can detect DC current injection required by VDE V 0126-1-1 requirements. The Q Relay works together with the Envoy-S to meet the need to break both line and neutral per grid requirements. See full installation instructions for the Enphase Envoy-S and/or Enphase Microinverters at: enphase.com/support. It is best practice to install the Q Relay when installing the Envoy-S and before commissioning the system. The Q relay is IP-20 rated. You must mount it in an environmentally protected enclosure.
